Greetings from Ukraine’s cultural capital – Lviv, which is famous not only for its narrow streets, historic monuments, and delicious aromatic coffee, but also for yeast. Yes, yeast itself! I’m sure you remember that feeling when you enter your grandmother’s kitchen, see a small package with “Lviv Yeast” written on it on the table, and realize that very soon you will be treated to delicious, fluffy, homemade pastry. Do you remember the aroma of rising dough? We, 4th-year students – Yulia Bolkun and Volodymyr Tretyak – had the opportunity to “enjoy” this aroma throughout our educational internship at Enzym.
Crossing the threshold of the entrance, we realized that we had entered another world – the world of yeast. And we are ready to share all the secrets with you…
First, about the history: the company Enzym traces its origins back to the distant 1870s. On the territory of the modern plant, a brewery was established, and by 1922, the plant began producing distiller’s yeast to meet its own needs. However, in 1945, what was then the Lviv Yeast Plant – apparently realizing this was more profitable – began producing exclusively baker’s yeast.
Enough history; let’s move on to something more interesting. Allow us to take you on a virtual tour of Enzym. Welcome to where it all begins – the inoculation booth. Here, microbiologist Dmytro and his young colleague Solomiya inoculate the culture from a test tube into special inoculation bottles, which after cultivation enter 2 fermenters with volumes of 10 m3 and 14 m3. Next, the culture medium enters the enormous 5-story fermenters with volumes of 75 m3 and 100 m3. For a long 16 hours, the yeast “gains strength” here, as ahead lies the commercial fermentation stage, which takes place in as many as 8 fermenters. After this, the essentially finished yeast is sent to separation, where it is separated from the residues of the nutrient medium. From there, it proceeds to vacuum filters, where starch is sprayed on it and water is “pressed out.” And then, the so-called yeast dough goes straight to the packaging section. Can you imagine that the packaging machine operates at a speed of six bars per second!? Next, the bars are packed into boxes, which a wonderful robot skillfully stacks and distributes on the shelves.
With dry yeast, everything is a bit more complicated. Before packaging, they are sent on “vacation,” as the local staff jokes. When asked, “Why vacation?”, they answer like this: “Because these yeasts first ‘sunbathe’ in a special drying cabinet, and then in the cyclones, they feel like they’re on roller coasters.”
In general, from our own impressions, I can say that the first thought that came to our minds the moment we entered the production section was: “After all, Yuriy Vasylovych told us the truth in his lectures on industrial production planning: there is a CIP washer here, heat exchangers, and plenty of pipelines.” In practice, we also had to recall lectures on ecobiotechnology when we were told that wastewater from the entire production is treated in aeration tanks and methane tanks. This is a massive complex of treatment facilities in whose methane tanks approximately 7000 m3 of biogas is produced per day, providing 70% of the plant’s energy needs.
We spent most of our time in the microbiology laboratory, where Dmytro and Solomiya, under the guidance of the laboratory manager Lyudmyla Borysivna, entrusted us with conducting a complete cycle of microbiological quality control – from sample collection to their analysis.
In general, we acquired so many emotions and knowledge that it is impossible to express them in words, because when theoretical knowledge about biotechnology from textbooks becomes reality, it is difficult to transform it back into words. There is nothing like seeing it in person rather than reading about it a hundred times.





